Supply Type :
Concrete Canvas Cloth, also known simply as Concrete Canvas (CC), is a flexible, cement-impregnated fabric that hardens when hydrated to form a thin, durable, and waterproof concrete layer. It combines the ease of installation of geotextiles with the durability of concrete.
Graphic Concrete is a patented technology that allows for the creation of durable, patterned concrete surfaces by transferring images or designs onto precast concrete using a special membrane with a surface retarder, resulting in a 100% concrete surface with a lasting, maintenance-free pattern.
Translucent concrete, a light-transmitting concrete-based building material, is gaining popularity for its unique blend of structural strength and aesthetic appeal, offering a new way to incorporate natural light into buildings.
3D concrete printing is a form of additive manufacturing used to fabricate buildings or construction components in completely new shapes.
3D concrete printing is a form of additive manufacturing used to fabricate buildings or construction components in completely new shapes.
The purpose of a humidity meter is for monitoring or measuring the moisture content of the air to decipher humidity. The calculations of the various measurements of humidity can be quite complex.
Concrete Filler slab is an alternate slab construction technology where part of concrete in the bottom of slab is replaced by filler material, in this case with terracotta pots. Mud plaster is recommended on top of shuttering sheets to ensure an even smooth finish of the ceiling.
Concrete Cell Field is an inexpensive alternative to laying concrete roads. It is used to build flexible roadways at a cheaper cost than blacktop roads. The concrete is flexible as a result of the construction procedure, and the surface does not crack.
Marine piling is the process of setting deep foundations into the bedrock below sea level to support nearshore and offshore based structures.
Concrete Construction below the water table is mostly managed by using cofferdams or pressurised caissons to exclude water sufficiently to work above the local water level within the enclosure, though it may also be possible to keep the water level down by pumping it out as fast as it seeps...
Erosion blocks are used to control erosion on embankments of waterways and artificial drainage channels.
Concrete structure vibration analysis is a service that measures and analyzes the vibrations in a concrete structure to determine its condition. Vibration analysis can help identify abnormal vibrations and reduce the risk of structural damage.
The deep concrete casting process is the process of creating structures or products using concrete in a deep ground project.
In underwater casting special type of high-performance concrete used in the past, present, and in the foreseeable future as long as there is need to construct bridges, with foundations in soil with high water levels, and almost all off- and onshore structures.
Long distance casting is a process of pouring concrete in at distant location.
High rise casting is a process of pouring concrete in very high floors of building or projects which is done using concrete pump and other equipments.
Concrete wall stamping is the procedure which uses the concrete stamps to make the pattern in the stamped concrete. Concrete stamps are placed on the concrete after the color release has been applied.
Concrete mobile lab testing is a service that uses a mobile lab to test concrete, aggregates, and other materials on-site. Mobile labs can be used in remote locations, such as military bases or islands, where transporting samples to a lab may be difficult.
Concrete Crosshole sonic testing is a method to determine the structural integrity of drilled shafts and other concrete piles. The CSL method is considered to be more accurate than sonic echo testing in the determination of structural soundness of concrete within the drilled shaft inside of the rebar cage.
Resistivity testing detects the possibility of reinforcing steel corrosion and the diffusion rates of chloride within the concrete.
Ground penetrating radar (GPR) is a non-destructive detection and imaging method which identifies subsurface elements either underground or within a surface such as concrete.
Hydro-Demolition is a technology that uses extremely high pressure water jets that are capable of removing concrete while not damaging the rebar. The practical application of this technique makes it an extremely effective and efficient method of concrete removal.
The technique – house-raising or lifting or jacking – used across the world involves digging up the topsoil to approach the foundation of the building. The foundation is then separated from its walls and pillars and steel beams or jacks (manual or hydraulic) are inserted to evenly lift the house...
Glow in the dark concrete is a fascinating innovation that combines traditional concrete with photoluminescent technology. This technology allows the concrete to absorb light during the day and emit it at night, creating a visually stunning and functional surface.
Warmup snow melting products keep walkways snow-free and safe. Snow melting mats or cables are placed under concrete, asphalt or pavers to prevent the accumulation of ice and snow.
3D Epoxy floors are simple two-dimensional floors that incorporate angled images with multiple translucent layers of different materials to get 3D effects. The image is pasted on the floor and finished with a top coat of special transparent epoxy paint.
Super flat flooring are concrete floors built to tighter tolerance with no intermediate joints .
Underfloor heating works by distributing a lower temperature of warm water through a circuit of pipes beneath the finished floor. Heat is monitored and controlled by intelligent thermostats to maintain a consistent temperature throughout the property or individual zones.
Laser Screed Flooring is a concrete floor that has been levelled by a machine that uses lasers to precisely scree the floor at the exact same height across the whole floor. The laser acts as a very accurate and very long piece of string.
Rebar Scanner is a portable intelligent non-destructive testing instrument used in the structural inspection of reinforced concrete. Carry out accurate testing by measuring the depth of rebar cover, and diameter of rebar on the surface of reinforced concrete, and analyze the distribution of the rebar.
Dry mix concrete, or dry-pack concrete, is a blend of cement, sand, and aggregates mixed and bagged at a plant or factory and then transported to the construction site, where water is added before application.
.png)
Self-consolidating concrete (SCC), also known as self-compacting concrete, is a type of concrete that can flow and consolidate under its own weight without the need for vibration or mechanical compaction, making it suitable for complex structures and areas with dense reinforcement.
Acid-resistant concrete, also known as chemical-resistant concrete, is a specialized type of concrete designed to withstand exposure to harsh acidic environments, commonly used in industrial applications like wastewater treatment and chemical processing.
Corrosion-resistant concrete utilizes various strategies to prevent the deterioration of steel reinforcement, including using high-quality concrete with proper mix design, curing, and the addition of corrosion inhibitors or protective coatings
Crack resistant concrete is a type of concrete mix designed to minimize cracking, especially due to drying shrinkage, by incorporating synthetic fibers and/or other additives that enhance strength and flexibility.
Water-resistant concretes are impermeable to water and other fluids either above or below ground. They are high density concretes that incorporate fine particle cement replacements.
Pervious concrete, also known as permeable or porous concrete, is a type of concrete with high porosity designed to allow water to pass through it, reducing runoff and promoting groundwater recharge.
Green concrete is different from its traditional counterpart in several ways: It uses waste material in its composition as a substitute for cement. It requires less energy for production, producing less carbon dioxide and reducing environmental damage.
Temperature controlled concrete is a concrete mix that's designed to maintain a specific temperature during construction. It's used in projects where temperature management is important, like skyscrapers, raft foundations, and infrastructure projects.
Trimix flooring machine is often used in commercial and industrial settings, such as warehouses and factories because it is durable and able to withstand heavy loads. It is also commonly used in the construction of roads, bridges, and other infrastructure.
Concrete Mixer Attachment for Tractor
Hydraulic Pile breaker is composed of cylinder modules and links, which can be adjusted and allows the pile breaker to fit around piles of varying shapes and sizes. Pile breakers come with different tip kits and tip lengths, which allows for easy maintenance and versatility.
Profometer Corrosion is the most advanced instrument for corrosion analysis based on half-cell method which is used to identify active corrosion of rebars based on the electro chemical properties of reinforced concrete for assisted measurements with rod and wheel electrodes.
Concrete Resistivity Meters are electronic meters used to measure the resistivity of fluids, slurries or semi-solids. These instruments feature solid state electronics, and are designed to meet the needs of field and laboratory personnel for resistivity measurement
Ground-penetrating radar is a geophysical method that uses radar pulses to image the subsurface. It is a non-intrusive method of surveying the sub-surface to investigate underground utilities such as concrete.
Concrete scanning is a non-destructive concrete assessment method which uses ground penetrating radar, or GPR, to evaluate the integrity of the structure in place and locate embedded utilities prior to concrete cutting, coring, drilling, etc.
Concrete Sensor to gain inside knowledge of what exactly is happening in their concrete, like a health monitor or a Fitbit stuck inside producing vital readouts of the inner workings of the mix reporting on temperature, and analyzing data to estimate maturity.
Pile Integrity Test (PIT), is a widely used non-destructive test method for the evaluation of pile quality, and integrity. The test can also be used to estimate the unknown length of existing piles and foundations.
Ultrasonic pulse velocity test is a non-destructive testing technique. It can be used to approximately evaluate the internal structural of a material.
Hydro demolition entails the use of high pressure or ultra high pressure water jet equipment in place of conventional tools to remove concrete and other materials. It is an incredibly effective way to cut down concrete without affecting steel substructures and other important parts of the structure.
Concrete Splitter uses hydraulic power to break up stone and concrete. As the direction of breaks can be determined, concrete can be cut in sections as large as your equipment can handle. Hydraulic splitting eliminates both shocks and vibrations associated with large impact tools.
Robotic Demolition is the superior solution for interior concrete removal. Demolition robots are basically miniature excavators minus the cabs. Instead, they operate on tracks, and have hydraulic or electric powered arms to which drills, crushers, breakers, or other necessary parts are attached.
Spider boom placer are specifically suitable for concrete placing where direct distribution with truck-mounted concrete pumps or stationary concrete. The Spider placing boom is easily installed on the jobsite and can connected to any of our boom pumps.
A paver laying machine is a construction machine that is optimized for the precise and rapid laying of paving stones.
The end-effector mounted at the bottom of the work unit performs floor finishing. The end-effector uses an ultrasonic vibration unit connected to a spatula, which squeezes the concrete surface to achieve a polishing effect. The robot can be operated remotely by a worker or by a pre-programmed movement path.
Laser screeds are self-propelled units featuring a telescoping boom and placement head used for quickly and efficiently leveling and vibrating liquid concrete during pouring.
Concrete mixing bucket attachment allows the operator to load, mix, transport, and discharge concrete much faster than the traditional stand-along mixer and wheel barrow.
The new Concrete Mixing Bucket attachment for the Backhoe Loader is a smart option to the conventional way of concrete mixing which is more tme-consuming and labour intensive. The concrete Mixing Bucket quickens the mixing process and transports the mix directly to where it is needed. Useful for any concrete...
